Spa Deliveries and Relocations

Spa Deliveries and Relocations




SPA DELIVERY GUIDE   We can deliver and you can enjoy!

Call us for a Quote!

We have the right equipment for the job to get your spa in the desired location.


Do you need a spa pool delivered, moved, re-located or stored?

Prices start from $399 + GST 

We genuinely mean it when we say it is far better to use us, (the professionals) to move your Spa Pool rather than someone who doesn’t have all the necessary skills, experience and/or specific tools for the job. Spa’s are heavy and awkward, and by the time you’ve gathered 6 mates, put on a BBQ and beers the cost is very comparable to what we charge.  We have been called many times to half attempted Spa Moves when the individual or company have taken on more than they can handle. We can relocate your spa using our spa dolly equipment/sled, ramps, inflatable Spa Wedge and our specifically designed spa trailer. We have moved many spa pools over the years so we have built up tricks and knowledge to overcome most obstacles as well as reducing the risk of any damage. We have full public liability and goods in transit insurance. We can also offer secure storage at our warehouse using CCTV camera’s and monitored 24 hour alarm security for a low weekly storage fee.

Access for Collection and Delivery

First, understand the dimensions of your spa by use of a tape measure. The height of most spa’s is 740mm – 960mm high. You will need to consider the Spa will be delivered on its side on a Spa Dolly system, using the trolley system we need a minimum at the tightest area of 840mm – 1m wide access.

Use the height of the Spa (when laid flat) which will become the width to determine the maximum width of clearance necessary. If the Spa Dolly width is greater this will be the measurement you will use.

Use the height of the Spa Dolly plus the height of the Spa when stood on its side to determine the vertical clearance required. Most spa’s range from 2m x 2m (mid range size) 2.4m x 2.4m (very large spa). Add the height of the spa dolly system (being 200mm). So a 2m x 2m spa will become 2.20m.  Height clearance under eve will need to be a minimum clearance of 2.25m or more.

NOTE: It may be necessary to allow for additional overhead clearance if the spa will be rolled up or down an incline or moved up or down a short flight of stairs. It may be necessary to remove a gate, part of a fence, or other movable obstructions in order to move the Spa to its installation site. Only about 10% of the time, a crane is the only way to install the spa by lifting it to its final destination.

How is your width clearance?

  • Check all gates
  • Protruding windows
  • Electric metres or air conditioning units
  • Vents and flu’s

Do you have sufficient overhead clearance?

  • Check low roof eaves,
  • overhanging branches,
  • Rain gutters
  • low house corners

Is the path clear?

  • Remove any other obstacles on the path
  • Is there a 90’ turn, can we clear it? (The Spa won’t bend)
  • No more than 6 consecutive steps without a landing.  Extra people may be needed to push if more than 3 steps.

Our cost is for a standard delivery

Any deliveries above and beyond a standard delivery may incur extra cost including

  • Steep slopes
  • Crane hire
  • 3 or more steps and building of ramps and platforms
  • Removal of trees and gates or other items that will not allow access
  • Installing cover lifters and cover clips
  • Removal of rubbish and pallet
  • Removing and disposal of old spa
  • 25km radius from our depot

For safety, if extra manpower is needed going up steep slopes or ramps we need to be advised prior to delivery.  To keep cost at a minimum, you may be or organise the extra manpower.